-
Polyester Veil (Apertured) for Pultrusion
Polyester veil ( poliester velo, also known as Nexus veil) is made from high strength, wearing and tear resistant polyester fiber, without using any adhesive material.
Suitable for: pultrusion profiles, pipe and tank liner making, FRP parts surface layer.
Polyester synthetic veil, with uniformity smooth surface and good breathability, guarantee good resin affinity, rapid wet-out to form a resin-rich surface layer, eliminating bubbles and cover fibers.
Excellent corrosion resistance and anti-UV.
-
Fiberglass Veil / Tissue in 25g to 50g/m2
Fiberglass veil includes: C glass, ECR glass and E glass, density between 25g/m2 and 50g/m2, mainly used on open molding(hand lay up) and filament winding process.
Veil for hand lay up: FRP parts surface as final layer, to get smooth surface and anti-corrosion.
Veil for filament winding: tank and pipe liner making, anti corrosion interior liner for pipe.
C and ECR glass veil has better anti-corrosion performance especially under acid circumstance.
-
Continuous Filament Mat for Pultrusion and Infusion
Continuous Filament Mat (CFM), consists of continuous fibers randomly orientated, these glass fibers is bonded together with a binder.
CFM is different from chopped strand mat because of its continuous long fibers rather than short chopped fibers.
Continuous filament mat is commonly used in 2 processes: pultrusion and close molding. vacuum infusion, resin transfer molding(RTM), and compression molding.
-
Infusion Mat / RTM Mat for RTM and L-RTM
Fiberglass Infusion Mat (also called: Flow Mat, RTM Mat, Rovicore, Sandwich Mat),which commonly consists of 3 layers, 2 surface layers with chopped mat, and core layer with PP(Polypropylene, resin flow layer) for fast resin flow.
Fiberglass sandwich mat mainly used for: RTM(Resin Transfer Mold), L-RTM, Vacuum Infusion, to produce: automotive parts, truck and trailer body, boat build…
-
Big Wide Chopped Strand Mat for FRP Panel
Big Width Chopped Strand Mat is specifically used for production of: FRP continuous plate/sheet/panel. And this FRP plate/sheet is used to produce foam sandwich panels: refrigerated vehicle panels, truck panels, roofing panels.
Roll width: 2.0m-3.6m, with crate package.
Common width: 2.2m, 2.4m, 2.6m, 2.8m, 3m, 3.2m.
Roll length: 122m & 183m
-
Emulsion Fiberglass Chopped Strand Mat Fast Wet-Out
Emulsion Chopped Strand Mat (CSM) is produced by chopping assembled roving into 50mm lengths fibers and dispersing these fibers randomly and evenly onto a moving belt ,to form a mat,then an emulsion binder is used to hold fibers together, then the mat is rolled on production line continuously.
Fiberglass emulsion mat(Colchoneta de Fibra de Vidrio) conforms easily to complex shapes (curves and corners) when wet-out with polyester and vinyl ester resin. Emulsion mat fibers bonded closer than powder mat,less air bubbles than powder mat during laminating, but emulsion mat can Not compatible well with epoxy resin.
Common weight: 275g/m2(0.75oz), 300g/m2(1oz), 450g/m2(1.5oz), 600g/m2(2oz) and 900g/m2(3oz).
-
E-LTM2408 Biaxial Mat for Open Mold and Close Mold
E-LTM2408 fiberglass biaxial mat has 24oz fabric(0°/90°) with 3/4oz chopped mat backing.
Total weight is 32oz per square yard. Ideal for marine,wind blades,FRP tanks, FRP planters.
Standard roll width:50”(1.27m). 50mm-2540mm available.
MAtex E-LTM2408 biaxial (0°/90°) fiberglass is produced by JUSHI/CTG brand roving,which guarantees the quality.
-
Quadraxial (0°/+45°/90°/-45°) Fiberglass Fabric and Mat
Quadraxial(0°,+45°,90°,-45°) fiberglass has fiberglass roving running in 0°,+45°,90°,-45° directions, stitched together by polyester yarn into a single fabric, without affecting structural integrity.
One layer of chopped mat(50g/m2-600g/m2) or veil(20g/m2-50g/m2) can be stitched together.
-
Tri-axial (0°/+45°/-45° or +45°/90°/-45°) Glassfiber
Longitudinal Triaxial (0°/+45°/-45°) and Transverse Triaxial (+45°/90°/-45°) fiberglass cloth is a stitch-bonded composite reinforcement combining roving oriented in commonly 0°/+45°/-45° or +45°/90°/-45° directions (roving also can be randomly adjusted between ±30° and ±80°) into a single fabric.
Tri-axial fabric weight: 450g/m2-2000g/m2.
One layer of chopped mat(50g/m2-600g/m2) or veil(20g/m2-50g/m2) can be stitched together.
-
Weft Unidirectional Glass Fibre Fabric
90° weft transverse unidirectional series,all bundles of fiberglass roving are stitched in weft direction (90°), which normally weighs between 200g/m2–900g/m2.
One layer of chop mat(100g/m2-600g/m2) or veil(fiberglass or polyester: 20g/m2-50g/m2) can be stitched onto this fabric.
This product series are mainly designed for pultrusion and tank,pipe liner making.
-
Roving for FRP Panel 2400TEX / 3200TEX
Fiberglass assembled panel roving for FRP panel, sheet production. Suitable for production of transparent and translucent panel, by continuous panel laminating process.
Good compatibility and fast wet out with polyester,vinyl-ester and epoxy resin systems.
Linear Density: 2400TEX / 3200TEX.
Product Code: ER12-2400-528S, ER12-2400-838, ER12-2400-872, ERS240-T984T.
Brand: JUSHI, TAI SHAN(CTG).
-
Polyester Veil (Non-Apertured)
Polyester veil ( poliester velo,also known as Nexus veil) is made from high strength, wearing and tear resistant polyester fiber, without using any adhesive material.
Suitable for: pultrusion profiles, pipe and tank liner making, FRP parts surface layer.
Excellent corrosion resistance and anti-UV.Unit weight: 20g/m2-60g/m2.
