-
PET Squeeze Net
PET squeeze net is made of high strength polyester yarn, been used on fiberglass filament winding process, to produce GRP pipes and tanks.
The apply of squeezing net, help squeezing out air bubbles during filament wound, and forming a resin-rich layer on pipe surface.
-
Mat + Veil (pultrusion)
A combo designed for pultrusion, combine chopped strand mat and polyester synthetic veil by glue, without PET stitch lines.
Utilise the stiffness and strength of mat, and anti-aging, UV protective, corrosion resistance properties from synthetic polyester veil.
An alternative to CFM(continuous filament mat), more economic and better profile finish.
-
Needle Mat (pultrusion)
Specially designed for pultrusion, in order to perfect surface of pultruded profiles.
Mat with extremely thin fiber, left no fiber print on profile surface, similiar function with CONFORMAT N720, much more economic.
-
PET film for panel
PET(polyester) film, made from polyethylene glycol terephthalate(PET),by biaxial oriented(BOPET) process.
PET film been used to produce fiberglass panel, include: bottom film and surface film.
MAtex offers: common use flat film & embossed film, for GRP panel production.
Roll wide: up to 3.6m
-
Film for filament winding
PET(polyester) film, made from polyethylene glycol terephthalate(PET),by biaxial oriented(BOPET) process.
Polyester film been used in fiberglass filament winding process, to produce GRP pipes,tanks, as a mould release agent.
One surface silicon oil coated,good tensile strength,makes demoulding process easier.
-
Polyester Synthetic Veil
Polyester synthetic veil (poliester velo,also known as Nexus veil), made from high strength,wearing and tear resistant polyester fiber.
-
Fiber-cored Veil (pultrusion)
This is a binder free, without stitch yarn combo, for pultrusion process.
Specifically designed for pulling fiberglass profiles which has strictly request on nice smooth surface.
Made of fibers and polyester veil, combine function of continuous filament mat(CFM) and polyester veil.
-
Double Bias Fiberglass Mat Anti-Corrosion
Double Bias (-45°/+45°) fiberglass is a stitch-bonded composite reinforcement combining equal amounts of continuous roving oriented in commonly +45° and -45° directions into a single fabric. (roving direction also can be randomly adjusted between ±30° and ±80°).
This construction offers off-axis reinforcement without the need to rotate other materials on a bias. One layer of chopped mat or veil can be stitched with the fabric.
1708 double bias fiberglass is the most popular one.
-
Stitched Mat (EMK)
Fiberglass stitched mat(EMK), made of evenly distributed chopped fibers (around 50mm length), then stitched into mat by polyester yarn.
One layer of veil (fiberglass or polyester) can be stitched onto this mat, for pultrusion.
Application: pultrusion process to produce profiles, filament winding process to produce tank and pipe,…
-
AR Glass Chopped Strands 12mm / 24mm for GRC
Alkali resistant chopped strands(AR Glass), used as reinforcement for Concrete(GRC), with high zirconia(ZrO2) content, strengthens the concrete and helps prevent cracking from shrinkage.
It is used in the manufacture of repair mortars, GRC components like:drainage channels, meter box, architectural applications such as ornate moldings and decorative screen wall.
-
Chopped Strands for BMC 6mm / 12mm / 24mm
Chopped Strands for BMC are compatible with unsaturated polyester, epoxy and phenolic resins.
Standard chop length: 3mm, 6mm, 9mm, 12mm, 24mm
Applications: transportation, electronic & electrical, mechanical, and light industry,…
Brand: JUSHI
-
Chopped Strands for Thermoplastic
Fiberglass chopped strands for thermoplastics are coated with a silane-based sizing,compatible with different kinds of resin systems like: PP, PE, PA66, PA6, PBT and PET,…
Suitable for extrusion and injection molding processes, to produce: automotive, electrical & electronic, sports equipment,…
Chop Length: 3mm, 4.5m, 6mm.
Filament diameter(μm): 10, 11, 13.
Brand: JUSHI.
